How To Replace Ps4 Thumbsticks: A Step-By-Step Guide

Thumbsticks on PS4 controllers can wear out over time, making it difficult to enjoy your favorite games. Fortunately, replacing them is a simple process that can be done at home with a few basic tools. In this tutorial, we’ll show you how to replace PS4 thumbsticks in just a few easy steps.

What You’ll Need

Before you get started, you’ll need a few tools. Here’s what you’ll need:

  • Replacement thumbsticks
  • Small Phillips head screwdriver
  • Small flathead screwdriver
  • Pliers

Step 1: Remove the Battery

To begin, turn off your PS4 controller and remove the battery. You can do this by flipping the controller over and sliding the battery cover off. Then, gently remove the battery from the controller.

Step 2: Remove the Screws

Next, use the small Phillips head screwdriver to remove the four screws on the back of the controller. Be sure to keep track of the screws so you don’t lose them.

Step 3: Open the Controller

Once the screws are removed, use the small flathead screwdriver to carefully pry open the controller. Start at the top of the controller and work your way down, being careful not to damage the controller or any of its components.

Step 4: Remove the Thumbsticks

With the controller open, you’ll see the thumbsticks attached to the circuit board. Use the pliers to gently pull the thumbsticks off the circuit board. Be sure not to damage the circuit board or any of its components.

Step 5: Replace the Thumbsticks

Next, take your replacement thumbsticks and attach them to the circuit board in the same position as the old ones. Be sure to align them properly and press them firmly into place.

Step 6: Close the Controller

Once the new thumbsticks are in place, carefully close the controller and snap it back together. Be sure to align the buttons and joystick with the corresponding holes in the front of the controller.

Step 7: Replace the Screws and Battery

Finally, use the small Phillips head screwdriver to replace the four screws on the back of the controller. Then, slide the battery back into place and replace the battery cover. Congratulations, you’ve successfully replaced your PS4 thumbsticks!


Q: Do I need any special tools to replace PS4 thumbsticks?

A: No, you don’t need any special tools. A small Phillips head screwdriver, small flathead screwdriver, and pliers are all you need.

Q: Can I replace PS4 thumbsticks with different types of thumbsticks?

A: Yes, as long as they are compatible with the PS4 controller, you can replace the thumbsticks with any type you like.

Q: How long does it take to replace PS4 thumbsticks?

A: It should take no more than 10-15 minutes to replace both thumbsticks.

Q: Will replacing PS4 thumbsticks void my warranty?

A: It depends on the warranty. Some warranties may be voided if you attempt to make repairs yourself. Check your warranty terms before attempting any repairs.

Q: Can I replace PS4 thumbsticks on a wireless controller?

A: Yes, the process is the same for both wired and wireless controllers. Just be sure to remove the battery before beginning.

Phillips head screwdriverRemoves screws from the back of the controller
Flathead screwdriverOpens the controller
PliersRemoves the old thumbsticks and attaches new ones

Remember to take your time and be careful when replacing PS4 thumbsticks. With a little patience and the right tools, you’ll have your controller working like new in no time.

Leave a Comment